#1 in Distributing Specialty
Chemicals & Equipment

Email Us Today Free shipping on
all chemicals (48 states)

  Home > Post Treatment Fluids > Paint and Coating Removers >

Paint Stripper High Alkaline Cleaner - 5 Gallons
Paint Stripper High Alkaline Cleaner
Paint Stripper High Alkaline Cleaner


 
Paint Stripper High Alkaline Cleaner
Our Price: $389.99
Sale Price: $329.99
Savings: $60.00

Quantity in Stock:34


Availability: Usually Ships in 1 to 2 Weeks
Product Code: STRIP-POWDER-5
Qty:

Description Shipping & Transit Times
 

Paint Remover High Alkaline Cleaner

Powdered, high-alkaline cleaner and paint stripper for spray and immersion systems.ChemWorld Strip Powder is:
  • lend of select alkali’s, non-phenolic penetrating agents, anti-scale agents, dispersant, and wetting agents.
  • Low in odor and provides rapid penetration and emulsification of even the most difficult soils and finishes, such as, urethanes, polyesters, epoxies, and even powder coatings.
  • Also effective in removing many types of inks, pigments, rust, and light scale around heat exchange areas.
  • Exhibits extended tank life and is safe and economical when compared to liquid stripping formulations.
  • Suitable for use in industrial immersion hot alkaline paint stripping soak operations.
  • Unique in its soil penetration ability due to a special combination of solvents absorbed into the product which loosens even resinous paint. If the solution can contact surfaces, the paint and build-up can be removed. Laboratory pre-testing of the stripper for effectiveness is typically recommended prior to start-up.
USE INFORMATION:
Concentration:
  • Light Paint and/or Oil Residue (0.25) pound per gallon
  • Moderate Paint; Heavy Oils and Soils (0.50) pound per gallon
  • Thick Paint and Extreme Residue (1.0 – 2.0) pounds per gallon
Operating Temperature: 140 - 210F.
Metallurgy: Only use on ferrous metals. Will severely attack aluminum.
Contact Time: As available.
Frequently Asked Questions
Would the Chemworld Strip Powder be a more cost effective alternative to Chemworld Strip All with similar results being that all of our hooks are steel and some of them are quite large so we would be building a large tank and it would take several buckets of Strip All to fill it?
An all steel paint remover like the Chemworld Strip Powder would be more economical, as you would simply need 2-pounds per gallon of the powder to work without fear of aluminum attack.
A 100-gallon gallon tank would need 200-pounds (4-pails) of product to charge.The potential downside is that heat MUST be used to strip, as a cold tank caustic based product would take a LONG time if it worked at all. You are looking at >180’F while the hooks are in the immersion tank.The ChemWorld Strip ALL can be used in an ambient temperature dip tank.
What is the weight on the 5 Gallon bucket?
The 5 Gallon bucket of our Strip Powder weighs 50 lbs net.

Share your knowledge of this product. Be the first to write a review »