Search
Chemicals
Chemical Brands
Equipment
Education Items
International Orders
Please EMAIL us direct with your Shipping Address and Products requests so we may quote you direct.
JZajac@ChemWorld.com
Manufactures and Suppliers
We are always looking to expand our offerings to our existing customers. If you manufacture a product in our industry and are looking to partner together, we are interested in speaking with you!
|
|
|
|
|
 |
|
|
Hot Water Sample CoolersWhat is a Hot Water Sample Cooler?
A Hot Water Sample Cooler is commonly used on Hot Water Systems, Hot Water Boilers, and Steam Boiler Systems. Water sample of these systems are performed to monitor the boiler chemical residuals.
What is the purpose of a Sample Cooler?
The purpose of a sample cooler is to obtain a sample in a cooled state. Depending on your system, obtaining hot water samples may not be an accurate representation of the hot water inside the hot water boiler or steam boiler. For example, in steam boilers without the use of a sample cooler, pure steam flashes off from the sample. The sample obtained without a sample cooler may provide false ph and sulfite residual numbers when performing boiler water test for a steam boilers.
How do you install a Hot Water Sample Cooler?
Proper installation requires valves on sample inlet and cooling water inlet for hot water service. An additional valve must be installed on the sample outlet for all vapor or steam services to obtain required operating pressures in the coil. Proper installation in superheated steam service also requires precooling the sample to 750°F, the maximum design operating temperature of the Neptune Sample Cooler. Precooling can be accomplished by installing a pipe between the main steam header and the sample cooler to radiate excess heat. The length of the pipe is determined from the chart at right.
|
|
|
For more information, please contact us at 800-658-7716 or email our sales consultant at JZajac@ChemWorld.com.
|
|
|
|
