Stenner Series 85Stenner Series 85 Single Head Adjustable and Fixed Pumps 0 to 25 psi and 26 to 100 psi, both come in 120 or 220 volt. You may also purchase an optional tank with your Stenner Pump (orange). The product codes are: Pump Code (blue), the power type (purple), tube type (pink), and tube material (yellow).
Stenner Pump Part Number Breakdown for Stenner Series 85: 85MJH-, 85MJL, 85MFL-, and 85MFH-:
Optional Tank
Number
| Model | Voltage &
Hertz
| Suction &
Discharge
Tubing
| Tube
Material
|
S7G = 7.5 Gal, UV Gray
S7N = 7.5 Gal, White
S1G =15 Gal, UV Gray
S1N = 15 Gal, White
S3G = 30 Gal, UV Gray
S3N = 30 Gal, White
| 85MJH-
85MJL-
85MFL-
85MFH-
| A= 120V, 60Hz
B= 220V, 60Hz
| 1= 1/4” White
2= 1/4” UV Black
3= 3/8” White
4= 3/8” UV Black
| S= Santoprene
T= Tygothane
|
Adjustable Stenner Series 85 - 25 psi
85MJL1=0.3-5.0gpd 85MJL2=0.8-17.0gpd 85MJL3=2.0-40.0gpd 85MJL4=3.0-60.0gpd 85MJL5=4.3-85.0gpd
Adjustable Stenner Series 85 - 100 psi
85MJH1=0.3-5.0gpd 85MJH2=0.8-17.0gpd 85MJH7=2.0-40.0gpd
Fixed Stenner Series 85 - 25 psi
85MFL1=5.0gpd 85MFL2=17.0gpd 85MFL3=40.0gpd 85MFL4=60.0gpd 85MFL5=85.0gpd
Fixed Stenner Series 85 - 100 psi
85MFH1=5.0gpd 85MFH2=17.0gpd 85MFH7=40.0gpd
Download the material resistance guide before proceeding. This will ensure you select the correct tube material.
Stenner Series 85 Pumps come with:
- 3 connecting nuts 1/4" or 3/8"
- 3 ferrules 1/4" or 2 ferrules 3/8"
- 1 injection check valve 100 psi (6.9 bar) or 1 injection fitting 25 psi (1.7 bar)
- 1 weighted suction line strainer 1/4"or 3/8"
- 20' roll suction/discharge tubing 1/4" or 3/8",white or UV black
- 1 additional pump tube
- 2 additional latches
- 1 mounting bracket
|
