#1 in Distributing Specialty
Chemicals & Equipment

Email Us Today Free shipping on
all chemicals (48 states)

  Home > Test Kits, Reagents, Etc. > Taylor Test Kits >

Taylor K-1546
Taylor K-1546
Peracetic Acid Test Kit


 
Taylor K-1546
Our Price: $144.99
Sale Price: $124.99
Savings: $20.00

Quantity in Stock:97


Availability: Usually Ships in 3 to 5 Business Days
Product Code: K-1546
Qty:

Description Shipping & Transit Times
 

Taylor K-1546

ChemWorld is a distributor of Taylor Technologies Test Kits and Reagents. Order directly online and save today.

DROP TEST PERACETIC ACID (0-1000 ppm)

COMPONENTS: 2 x 4030 Pipet, Calibrated 0.5 & 1.0 mL, plastic w/cap 1 x 4078 Pipet, Graduated, 3 mL (0.5 mL div.), plastic 1 x 5015 Instruction 1 x 9198 Sample Tube, Graduated, 25 mL, plastic w/cap 1 x R-0925 PAA Reagent #1 1 x R-0926 PAA Reagent #2, DB 1 x R-0927 PAA Reagent #3 1 x R-0928 PAA Reagent #4, DB 1 x R-0929 PAA Titrating Solution, DB.

NOTE: This test determines peracetic acid concentrations in systems treated with products that contain only peracetic acid (up to 20%) and hydrogen peroxide (up to 30%) as the active ingredients. The Product Factor (PF), calculated below, represents the peracetic acid in the treatment product and is used to determine the appropriate sample size for the test and to calculate the peracetic acid concentration in the system. The percentages of peracetic acid and hydrogen peroxide needed to calculate the PF may be found on the treatment product label, MSDS, or Certificate of Analysis.

Treatment Product Used ____________
Percent Peracetic Acid = __________
Percent Hydrogen Peroxide = _________

Calculate A:

A = Percent Peracetic Acid _______________________ = ___________ = ______________
38 38

Calculate B:

B = Percent Hydrogen Peroxide ____________________ = ___________ = ____________
17 17

Calculate PF:

PF = A -------------------
_____ = + = _________________
A+B

1. Select sample size from the chart below that corresponds to the peracetic acid treatment range and calculated Product Factor (PF):

Treatment Range

Product Factor 0-10 10-100 100-300 300-1000
ppm ppm ppm ppm
up to 0.15 25 mL 2.5 mL 1.0 mL ---
0.15 - 0.3 25 mL 5.0 mL 2.5 mL 1.0 mL
0.3 - 0.5 --- 10 mL 2.5 mL 1.0 mL

2. Rinse and fill 25 mL sample tube (#9198) to selected sample size with water to be tested.

NOTE: For 1 mL and 2.5 mL samples, use a 3.0 mL pipet (#4078) to collect and add desired sample to a clean, dry 25 mL sample tube.
3. Using a 1.0 mL pipet (#4030), add 0.5 mL R-0925 PAA Reagent #1. Swirl to mix.
4. Add 5 drops R-0926 PAA Reagent #2. Swirl to mix. Sample will turn a straw to yellow color if product is present.
5. Using another 1.0 mL pipet, add 0.5 mL R-0927 PAA Reagent #3. Swirl to mix. Wait 15 seconds.
6. Add 5 drops R-0928 PAA Reagent #4. Swirl to mix. Sample will turn deep blue.
7. Add R-0929 PAA Titrating Solution dropwise, swirling to mix thoroughly and counting after each drop, until color just changes from blue to colorless. Always hold bottle in vertical position.
8. Using the equation below, calculate peracetic acid concentration: PAA = Drops R-0929 x 100 (_____________ x PF) Sample size Record as parts per million (ppm) Peracetic Acid (w/v)

NOTE: To convert peracetic acid (w/v) to (w/w), multiply ppm peracetic acid (w/v) by the specific gravity of the treatment product found on the product's label, MSDS, or Certificate of Analysis.

Share your knowledge of this product. Be the first to write a review »