#1 in Distributing Specialty
Chemicals & Equipment

Email Us Today Free shipping on
all chemicals (48 states)

  Home > Spectroline Leak Detection >

Spectroline OLK-444 - 16 oz solution
Spectroline OLK-444 - 16 oz solution

Alternative Views:

OLK-444 Leak Detection Kit - 16 oz
Our Price: $299.99
Sale Price: $259.99
Savings: $40.00

Quantity in Stock:3

Availability: Usually Ships in 24 Hours
Product Code: OLK-444

The following document(s) will be emailed upon shipment of your order or download now:

Description Shipping & Transit Times

Oil Detection Kit

The Most Powerful Kit to Find Leaks in Any Size Oil-Based Fluid System. This is a 16 oz container size kit. We also have an 8 oz Spectroline 441 oil leak detection kit if you have a very small volume system. Prevents expensive equipment breakdowns and potential environmental problems. Ideal for pinpointing leaks in hydraulic systems, compressors, engines, gearboxes and fuel systems. Complete oil and hydraulic system kit.

How much leak detection fluid should I use?
In general, this is the feedrate:
  • Light weight hydraulic fluid - 1 oz per 8 gallons (This kit does up to 128 gallons)
  • Very dark or intensely blue hydraulic fluid and lubrication fluids - 1 oz per 4 gallons(This kit does up to 64 gallons)
  • Compressor oil - 1 oz per 4 gallons(This kit does up to 64 gallons)
  • Engine oil - 1 oz per 3 gallons Gearbox oil - 1 oz per gallon (This kit does up to 16 gallons)
This rechargeable violet light LED leak detection flashlight kit includes:
  • OLX-400I OPTI-LUX 400 high-intensity, rechargeable, violet light LED leak detection flashlight
  • 16 oz (473 ml) twin-neck bottle of patented OIL-GLO 44 concentrated oil dye. OIL-GLO MSDS download.
  • 8 oz (237 ml) spray bottle of GLO-AWAY dye cleaner
  • Smart charging cradle with AC and DC cords sets
  • Lanyard, fluorescence-enhancing glasses and dye treatment tags
  • Rugged carrying case
What type of systems would we use this product in?
OLK-444 leak detection kit is ideal for pinpointing leaks in hydraulic systems, compressors, engines, gearboxes and fuel systems.

Remove the battery insulator before first use. Press the button once to turn the flashlight on. Press it again to turn the flashlight off. Batteries are included.

  • Add the appropriate fluorescent dye and run the system to circulate. (See instructions included with dyes.)
  • For best results, use in low-light conditions.
  • Scan the system with the flashlight while wearing the fluorescence- enhancing glasses. You'll easily see the precise location of every leak by its bright fluorescent glow.
After the leaks are repaired, clean the remaining dye from the leak sites with Spectroline GLO-AWAY dye cleaner or a shop solvent. Remaining dye could be mistaken for a leak. Check all areas again with the lamp to make sure no dye remains. Run the system for another 5 to 10 minutes and reinspect with the OPTIMAX 400. No glow means that all leaks have been properly repaired.

Twist the end cap counterclockwise to open. Insert 3 AAA batteries with the positive end toward the lamp head. Replace the end cap.

Share your knowledge of this product. Be the first to write a review »