 |
275 Gallon Tote Pump
B36/MSL-PP 41 HC 47" Set.
Comes with motor B 36 (120 V) motor, immersion depth: 39" / 1000 mm (seal less). Suitable for emptying 275 gallon IBC Totes conditionally safe to run dry.
Liquid examples:
- For thin-bodied acids such as hydrochloric acid, battery acid, ferric (III) chloride, phosphoric acid, chromic acid, citric acid, propylene glycol, boiler chemicals, cooling water chemicals, biocides, Dowfrost, Dowfrost HD, deionized water, distilled water, etc.
Features:
- No grease fillings.
- Optimized drum drainage.
- Modular, service friendly design.
- Radial-flow impeller (L) for higher delivery head.
Benefits:
- Lube-free pump tube, thus no contamination of the liquid.
- All-purpose resistant PTFE shaft bearing.
- Two impeller geometries for a tailored pump characteristic.
- Easy maintenance without special tools.
- Sealing modules of mechanical sealed (MMS)
Immersion Length: 39" (1000 mm) (55 gallon drum)
Flow Rate Max.: 13.2 GPM (50 l/min)
Pumping Head Max: 31 ft. (9.5 m wc)
Viscosity Max: 600 cps (600 mPas)
The Lutz full model number for this electric pump set is B36 MSL-PP 41 HC 47". It may be used with most Acids and Base or water solutions
Includes:
- Motor B36 with 16 ft cord
- 47“ sealless polypropylene pump tube
- High head impeller
- 3/4“ polypropylene nozzle
- 8’ PVC Hose
- Hose Clamps
- Wall Hanger
This product typically ships if ordered by 2 pm today.
If you need the product to ship today, please indicate so in the notes section upon check out. We will email mail you ASAP if we can meet your demands. For guaranteed delivery dates, please [email protected] us for a quote.
You will receive a tracking number once the order is being processed or when it has shipped.
Note: This is an estimated time for commercial locations. If you are in a remote or difficult to reach location, it may take additional transit time. ChemWorld is not responsible for delays due to weather or carrier problems.
|
|
|
Delivery was quick and easy! 
