Closed Loop Water Leaks
Closed loop water leaks are very commonly. In theory, closed loops typically expect a 5 to 7% annual water loss. If you closed loop water system is losing and making up more water to 7%, you may consider exploring the source of the closed loop leak.
First, you should always install a water meter on the makeup water line to the closed loop system. This is the easiest way to periodically check if you system is calling for more water without performing chemical residual checks. ChemWorld 2338D is ideal for controlling corrosion in hot water and chilled water systems. ChemWorld 2338D will turn the water a light pink when properly dosed, 2338 is a clear version. 2338D benefits are:
- It serves as a leak detection solution. Therefore, you can let everyone in your facility to look for a light pink water leak or stream.
- Ease of product detection. Just add the product to the system until it turns pink or until the nitrite levels reach 600 ppm.
A 55 gallon drum will treat roughly 10,000 gallons.