#1 in Distributing Specialty
Chemicals & Equipment

Email Us Today Free shipping on
all chemicals (48 states)

  Home > Post Treatment Fluids > Paint and Coating Removers >

Paint Booth Paint Stripper (Immersion) - 5 Gallons
Paint Booth Immersion Paint Stripper
Paint Booth Immersion Paint Stripper


 
Alternative Views:


Paint Booth Immersion Paint Stripper
Our Price: $449.99
Sale Price: $319.99
Savings: $130.00

Quantity in Stock:26


Availability: Usually Ships in 3 to 5 Business Days
Product Code: STRIP-IMMERSE-5
Qty:



The following document(s) will be emailed upon shipment of your order or download now:

Description Shipping & Transit Times
 

Paint Booth Immersion Paint Stripper

Immersion paint stripper formulated to remove urethanes, epoxy, powder coating, e-coating, C.A.R.C, and difficult-to-remove coating systems. ChemWorld Immerse is:
  • A unique environmentally sensitive immersion paint stripper formulated to remove urethanes, epoxy, powder coating, e-coating, C.A.R.C, and difficult-to-remove coating systems.
  • Does not contain hazardous ingredients such as phenol, creosol, chromate, cresylic acid, or methylene chloride.
  • Was formulated to stryp coatings from all ferrous metals and most non-ferrous metal without effect on the metal. Recommended operating temperature for quickest stripping results is 120F to 140F, but most stripping can typically be completed at room temperature.
Hazardous Ingredients:
  • Benzyl Alcohol - Cas No. 100-51-6
  • Aromatic Sulfonate Detergent - proprietary blend
  • Dihydrogen Sulfate - Cas No. 7664-93-9
  • Hydroxyacetic Acid - Cas No. 79-14-1
APPLICATION:
  • Use as received, but can be cut 50/50 with water for light-duty or single coat paint removal.
  • Heat from ambient to 140F (Heat will significantly decrease strip time on almost every coating).
  • Use heat and acid resistant tank, piping, and equipment.
  • Mix or recirculate when heated, as components could separate during lengthy heating periods.
  • Cover tank when possible to minimize product evaporation.
  • Remove parts slowly from the process tank to minimize product drag-out.
  • Let parts drain over the tank whenever possible. Rinse in fresh water after stripping.
  • Remove stripped paint from tank often. This will extend tank life and minimize paint removal time.
This product ships as NOT REGULATED BY DOT (acidic cleaning liquid NOIBN).

We list only 5 gallon pails for small volume users. For 55 or 275 gallon containers please, email us with your zip code at [email protected] for a delivered price.
Frequently Asked Questions
Will your Paint Stripper Chemworld Paint Immerse go through 5 plus inches of both epoxy primer and polyurethane paint on the floor?
It would be nearly impossible to get through 5” thick epoxy primer and polyurethane paint with a chemical. 1/4” is about the maximum. That paint must be manually removed first, then a paint removal program can be started.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Strip-Safe! May 12, 2021
Reviewer: Nathaniel Skiles from Bryn Mawr, PA United States  
I handle massive amounts of small parts. This product is essential. You guys have handled my orders quickly and efficiently.

Was this review helpful to you?